ok been told to bin the sb4100.. i have a ambit 256 and sb5101e can these be done with out com ports... because my original modem blow out with the lighting and thunder this end.. gutted got four girls giving me shit lol cheers all lee

Hi guys im new here and im trying to mod a cable modem .I usaully get them off craglist but all i have gotten is ripped off . I would like some help please if anyone can teach me how to get them up and running with internet what cables i need and which is the best docis 3 to mod i have basic computer knowledge fix and soldering . so thanks in advance for any help you guys can give me also if you can make a video to help out new people that come here it would be great .

hi all,gota a couple of questions for some of the experts here:
1: i have 5101e on diag took a telnet log then i tried to set auto console in putty back to 0 and says unrecognised command??
2:i put the same modem back to lite took a telnet log,both of which i have included, on the diag i noticed cvcs are invalid so i put it back to v media stock dump or should say the teleepest dump i saved before i flashed it connected to coax booted it up and i went to 192 gui and clicked adresses tab and it says serial number dead01
hfc mac address says 00:20:40e:ad:01
and cpe us address says 00:20:40e:ad:09
no matter what mac i change it to it goes back to that i have just wrote any one no why??

i also want to no how can i activate telnet on this stock dump iff some kind person would point me i right direction??? thanks

by way here is my software version :
Software Version: SB5101-2.4.1.6-SCM02-NOSH
Hardware Version: 1
MIB Version: II
GUI Version: 1.0

and here are both telnet logs from diag and lite
forgot to mention i can get online with this modem but it as a 76byte config instead of a 428byte so only getting half meg dl speed so my thoughts were to try and obtain the cvcs that were invalid,thanks for reading
diag log:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.07.25 21:10:24 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon

Username: SHAKEY
Password: ******
Welcome.

CM>
CM> run
CM>
CM> run_app


Running the system...


Beginning Cable Modem operation...

0x0001e38e [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 0
Favorite[0].freq = 339000000
Attempting Downstream FEC lock @ freq= 339000000 Hz, QAM64/256

CM> Found energy at frequency 339000000Hz! Publishing event kEventEnergyDetected...
0x0001e78a [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 339000000 Hz
Carrier Offset = 9 Hz
Symbol rate = 5360537 sym/sec
SNR = 38 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x157d9b64
Power Level = -1 dB
QAM = LOCKED
FEC = LOCKED
******************************************


CM> Selecting UCD for Us Channel 3

0x000205e4 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x0002085a [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x0002085a [CmDocsisCtlThread] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 40.0 dBmV
0x0002085a [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.

RNG-RSP Adj: tim=2456 power=0 freq=0 Stat=Continue

CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success

******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 3
Upstream Frequency = 18800000 Hz
Upstream Power = 40 dBmV
Ranging SID = 0xceb
Upstream Symbol Rate = 2560000 sym/sec
******************************************

Calculating maximum number of IP filters:
Each IP filter consumes 1848 bytes of RAM.
Current free RAM is 465136 bytes.
Max heap reserved for IP filters (25%) = 116284
We can support 62 IP filters.
Calculating maximum number of LLC filters:
Each LLC filter consumes 720 bytes of RAM.
Current free RAM is 465116 bytes.
Max heap reserved for LLC filters (25%) = 116279
We can support 161 LLC filters.
Starting IP Initialization with DHCP...
DHCPc: Waiting 1 seconds before sending Discover; client id htype=1, value=00:11:e6:69:xx:xx
Not logging event ID 2307948624, control for level 7 is 0.

CM> DHCPc: Sending Discover packet; client id htype=1, value=00:11:e6:69:xx:xx
DHCPc: Received an Offer from DHCP server 00:21:1b:bf:5c:01 (10.50.104.1); lease client id htype=1, value=00:11:e6:69:xx:xx

CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:11:e6:69:xx:xx
DHCPc: Sending Request packet; client id htype=1, value=00:11:e6:69:xx:xx
DHCPc: Received an Ack from DHCP server 00:21:1b:bf:5c:01 (10.50.104.1); lease client id htype=1, value=00:11:e6:69:xx:xx
Current IP address is default 0.0.0.0.
0x00021912 [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.50.109.41 (primary IP address)
Subnet Mask = 255.255.248.0
Router = 10.50.104.1
IsPrimaryInterface = 1

Logging event: DHCP WARNING - Non-critical field invalid in response.
ARPing for default GW IP = 10.50.104.1
MAC = 00:21:1b:bf:5c:01
DHCP completed successfully!

DHCP Settings:
Client Id = htype=1, value=00:11:e6:69:xx:xx
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID = 0x2761c1ea
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:21:1b:bf:5c:01
Ignore NAKs = 0
My offered IP address = 10.50.109.41 (primary IP address)
(1) Subnet Mask = 255.255.248.0
(3) Router IP address = 10.50.104.1
(54) DHCP Server IP address = 62.253.131.161
(82) Relay Agent IP address = 10.50.104.1
TFTP Server IP address = 10.50.104.1
CM Configuration file = 'UBsgvca69834ncxv9873'
(2) UTC Time Offset = 0 seconds
(4) Time Server IP address = 10.137.103.1
(6) Domain Name Server =
(7) Log Server IP address =
(51) Lease time = 604798 seconds
(58) T1 (renew) = 302399 seconds
(59) T2 (rebind) = 529198 seconds
Lease is infinite = 0


SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.50.109.41, Subnet=255.255.248.0, Gateway=10.50.104.1
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr = 10.50.109.41
Starting Time Of Day...
0x0002199e [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 10.137.103.1
Connecting to ToD server 10.137.103.1...
Sending UDP ToD request to server...
SNMP Agent Binding to 10.50.109.41:225
Not logging event ID 2291949724, control for level 7 is 0.

CM> UTC returned by ToD server 3583771866; UTC offset 0
Current system time -> Thu Jul 25 20:11:06 2013

System start time -> Thu Jul 25 20:08:49 2013

Starting Tftp of configuration file...
Opening file 'UBsgvca69834ncxv9873' on 10.50.104.1 for reading...
tftp-enforce bypass is using 10.50.104.1:UBsgvca69834ncxv9873
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass succeeded.File was 76 bytes
Storing received cfg of size 76 to memory
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address = 10.50.104.1
Server Port Number = 69
Total Blocks Read = 1
Total Bytes Read = 76

Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Sending a REG-REQ to the CMTS...
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
Received a REG-RSP message from the CMTS...
0x00021b7e [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.0 config file!
Adding DOCSIS 1.0 CoS Settings for SID 0xceb

Class Of Service Settings:
SID = 0xceb
Max Us Burst = 1600 bytes
Max Us Rate = 542000 bits per second
Max Bucket size = 24288 bits
Bits In Bucket = 24288
Last Bucket Update Time = 139112 ms
Last Bucket Flush Time = 139112 ms
Packet Delay Time = 0 ms

Global CONCAT has been enabled for all upstream queues.
The CONCAT threshold is set to 2 packets (128 packets max).
Fragmentation is ENABLED in DOCSIS 1.0 mode!
Registration complete!
Process CVC
0x00021b88 [CmDocsisCtlThread] CmSecureDownload::ProcessConfigFileManufAndCosignerCvcs: (Secure Software Download) WARNING - No CVC included in config file; software upgrade can't be performed!
0x00021b88 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ProcessCVC: (CmDocsisCtlThread) ERROR - Config file does not include a valid CVC!
DOCSIS CoS/QoS rate shaping enable is now 1
CmSnmpAgent::CmOperationalEvent for SB5102 CM Agent w/ BRCM Factory Support
CmSnmpAgent operating in 1.0 mode, including docsBpi, excluding docsQos
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
SB5102 CM Agent w/ BRCM Factory Support enabling management.
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
0x00021b92 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchBpkm: (CmDocsisCtlThread) BPKM disabled via provisioned config file setting.
Enabling network access for all CPE ports.

mot_scanList: Writing to Flash!
0x00021bba [CmDocsisCtlThread] BcmDocsisCmHalIf::ConfigOperational: (DOCSIS CableModem HalIf) Running IGMP in DOCSIS 1.0 mode!
BcmCmDocsisStatusEventCodes::kCmIsOperational
0x00021bba [CmDocsisCtlThread] BcmVendorCmApplication::StopDhcpServer: (VendorExtension CmApp) Shutting down DHCP Server...
0x00021bba [CmDocsisCtlThread] BcmStandbySwitchThread::CmIsOperational: (Motorola Standby Switch Thread) Simulating a press of the standby switch to get the state configured properly.
0x00021bc4 [IGMP Thread] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread)
0x00021bc4 [Motorola Standby Switch Thread] BcmStandbySwitchThread::ThreadMain: (Motorola Standby Switch Thread) Standby switch was pressed!
0x00021bce [Motorola Standby Switch Thread] BcmStandbySwitchThread::ProcessSwitchEvent: (Motorola Standby Switch Thread) Leaving standby mode; restoring previous NACO and DHCP server states, and changing the LEDs.
0x00021bce [Motorola Standby Switch Thread] BcmVendorCmApplication::StopDhcpServer: (VendorExtension CmApp) Shutting down DHCP Server...
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
Not logging event ID 2296948624, control for level 7 is 0.
Not logging event ID 2300955525, control for level 7 is 0.

CM>

---

here is my lite log:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.07.28 17:31:02 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon

Username: SHAKEY
Password: ******
Welcome.

CM>
CM> run
CM>
CM> run_app


Running the system...

BcmCmDocsisStatusEventCodes::kCmIsNotOperational
CamDeleteAddress: Deleted address from cam segment 0

CM> Non-Vol Settings successfully written to the device.

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17

mot_scanList: Setting override freq @ 7000000
Scanning DS Channel at 7000000 Hz... (Initial target freq)

mot_scanList: Setting override freq @ 0
Favorite[1].freq = 331000000
Attempting Downstream FEC lock @ freq= 331000000 Hz, QAM64/256
Go back to 1st favorite
Attempting Downstream FEC lock @ freq= 90000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 98000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 106000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 114000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 122000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 130000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 138000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 146000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 154000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 162000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 170000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 178000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 186000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 194000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 202000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 210000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 218000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 226000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 234000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 242000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 250000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 258000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 266000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 274000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 282000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 290000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 298000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 306000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 314000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 322000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 330000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 338000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 346000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 354000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 362000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 370000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 378000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 386000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 394000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 402000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 410000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 418000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 426000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 434000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 442000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 450000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 458000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 466000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 474000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 482000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 490000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 498000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 506000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 514000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 522000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 530000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 538000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 546000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 554000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 562000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 570000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 578000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 586000000 Hz, QAM64
Favorite[0].freq = 339000000
Attempting Downstream FEC lock @ freq= 339000000 Hz, QAM64/256

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 339000000 Hz
Carrier Offset = 9 Hz
Symbol rate = 5360537 sym/sec
SNR = 35 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x155cd6c8
Power Level = 0 dB
QAM = LOCKED
FEC = LOCKED
******************************************


CM> Selecting UCD for Us Channel 3


RNG-RSP Adj: tim=2453 power=0 freq=0 Stat=Continue

RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success

******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 3
Upstream Frequency = 18800000 Hz
Upstream Power = 40 dBmV
Ranging SID = 0xceb
Upstream Symbol Rate = 2560000 sym/sec
******************************************

Starting IP Initialization with DHCP...

CM> ARPing for default GW IP = 10.50.104.1
MAC = 00:21:1b:bf:5c:01
DHCP completed successfully!
DHCP: IP address = 10.50.109.41

Starting Time Of Day...
SNMP Agent Binding to 10.50.109.41:225
Current system time -> Sun Jul 28 16:32:06 2013

System start time -> Sun Jul 28 16:29:41 2013

Starting Tftp of configuration file...
tftp-enforce bypass is using 10.50.104.1:gvca69834ncxv9873254
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass succeeded.File was 76 bytes
Storing received cfg of size 76 to memory
Time Of Day completed...
Enabling network access for all CPE ports.

mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational

Any can help Me in install Haxor in my modem/ have any tutorial or apps?

i scanned few certs and i lande it with sb612xxxx can i use this with forceware or i have to do or add numbers to it..

also i have another cert that came llike this SB_KOMODO
that i understand they blong to D3 mdm..
also i got some from 5120 but when i imput them with haxo
i get operacional but no internet ...
can somebudy explined ...cause this r 1 day old certs....somewhere in KAlifa
CWT

https://www.youtube.com/watch?feature=pl...sT8#at=725

I am interested in being able to update the original firmware (not hacked) for the SB5101 and SB5101u; can this be done through the ethernet port using StormWatch II?

I am not interested in doing anything illegal, just to update my modems' firmware.

This is a MUST HAVE

please pm me if you are interested in trading

hi guys so here is my problem im on a network that use webstar modems mostly epc2203 (and no motorola modems), telnet is disabled and they use .p7b certs EURODocsis. So i need little help i have no idea how to insert those certs on haxorware or what macs should i need for this network.
Advice any1 what should i do should i dump from modems, convert anything or what? and make things work here, im a little new in those things, so thanks for the time reading and sorry for bad english.I have sb 5101 with haxo.

I attached the cert (that cert is 1year old we use epc2203-E10-13-v202r1262-110516cs now , basicly same) and one cfg (its fresh)...

  epc2203-E10-5-v202r1262-070126cs-CVC060414.rar (Size: 1.64 MB / Downloads: 4)

  bac1010001060019477c41XX(changed two last numbers to xx).rar (Size: 1.55 KB / Downloads: 3)

I Currently am a paying costumer first of all. I also have a spare hacked modem that recently was shot down. How do i retrive a new config file off from my provisional modem for my spare one. I don't know much about dynamic config file names if they're too long with ?Be..... with no file extension. So how do I retrieve it from tftp appp?

Is it true that it is no longer possible to use the SB5101 modified cable modem to get free internet service? I heard that it may be possible to use modified modems; however some additional modifications must be made.

Hey Does Any1 Have An Account On A Decent Torrent Site
That They Could Give Me A Invite Code For


I Upload/Download

Good Ratio

hey.
lets play a game. i dont kow what the heck this crap is.

all i know, is that i need a new, modem. well. it's got to have my mac. but i dont kow what to do. someone can help me? i've got a sb5101. but the descriptions i read, don't tell me which one i have. this isnt my current modem. its the regular one i got, and it's worked. so thats my infomration i need to get my modem back onllnie but mines old. so i dont know what to do. and i dont want my modem nmot back online.

mines gettign a short, and just randomnly drops offline. and whats the mints? and the auto pay? what?

my modems not one of these. but i need it back online. what should i do? i have a tj one of those modems. i have roadrunner. if that helps any..? thanks.

Been tryng but I need help...* One-click Webstar flash utility *
(visit http://www.sbhacker.net for more inforamtion)

- Make sure that your current modem firmware is v202r1256-060303 or later
- Make sure that your firewall is off
- Enter your Windows Network Connection Name (none=default):
-
Access is denied.
The filename, directory name, or volume label syntax is incorrect.


The system cannot find the file tftpd32.exe.
The system cannot find the path specified.
The system cannot find the path specified.
'snmpd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmptrapd.exe' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpget' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.
'snmpwalk' is not recognized as an internal or external command,
operable program or batch file.
'snmpset' is not recognized as an internal or external command,
operable program or batch file.

- Wait until the TFTP Sent the Firmware (~17 seconds)
- Wait ~5 more seconds and reboot your modem
- Press enter to continue...

anyone know how to lock hd boxes where the menu disappears and it stays on please pm nned help asap I know it a little off topic.

Hello Guys What Would Be SB5100 Stealth Settings...

Model : SB5100
Software Version : SB5100-0.3.1.3-SCM00-NOSH




Vendor Motorola Corporation ??
Override Hardware Version ??
Hardware Version ??
Override Bootloader Revision ??
Bootloader Revision ??

Hey all,

New to the forum, its been quite some time since ive used haxorware. Im on Comcast in SWFL. Modem is running rev 39. It will not get passed 'Registration Complete' regardless of the settings i play with.

This is a completely legit setup, the modem's original HFC mac is registered with comcast with the serial number. I have processed a revert to 'default' settings, along with tried all BPI settings.

When BPI is set to disabled, it clearly wont register along with 1.0. If it is set to BYPASS+, it will register and come online however it will not dish an IP from the DHCP server. When on 1.1, it pulls the correct config from comcast, gets an IP, and is pingable on comcasts side however it never kicks into 'operational' mode.

Stealth look to be original, if anyone knows what they should be so i can verify ..

Any ideas would be appreciated..

has anyone net-snmp so can use on the me modem plz