Where to start?
Well I currently have brighthouse ISP which belongs to RR in florida.
They gave me a WebStar DPX2203 modem to provide for the internet service of course paying..
I have a SB5100 with MoD firmware on it which I used to spoof the MAC of the webstar modem to see if i was able to get the CM file, but to my surprise it seems like this provider is encrypting the file since the name comes out to be: TFTP Config ?BEEfFloAFPiDtJUKwI8M@CsCPDFohpf1v55I2z5ccbvultR89szsk - <<--- I know right ??? So obviously I cannot download the CM and use something like DiFileCPE to change the CM file. I also get an Error message saying 0x041D2C1C Configuration File CVC Validation Failure which for what I have read in the forum looks to me like it might be the certificates ?
I tried changing from DOCSIS 1 to 1.1 and also enabling and disabling the BPI and BPI+, but no success at all.. <<-- big surprise..
I downloaded a few tools from here like: FastCert v0.3, SNMPRape v1.1, even CertTxT v1.0; but which modem do I have to obtain the certificates the webstar or the SB5100 ? Also how can I know which range I have to scan ? cause scanning 16.7 million ip address will take ages lol 10.0.0.0 - 10.255.255.255 ...
When I scan with DHCP Force for some reason it doesn't get any MAC nor any info at all..
What do I need to make this work? Any tips or ideas will be greatly appreciated.!!! Thanks in advance
Well I currently have brighthouse ISP which belongs to RR in florida.
They gave me a WebStar DPX2203 modem to provide for the internet service of course paying..
I have a SB5100 with MoD firmware on it which I used to spoof the MAC of the webstar modem to see if i was able to get the CM file, but to my surprise it seems like this provider is encrypting the file since the name comes out to be: TFTP Config ?BEEfFloAFPiDtJUKwI8M@CsCPDFohpf1v55I2z5ccbvultR89szsk - <<--- I know right ??? So obviously I cannot download the CM and use something like DiFileCPE to change the CM file. I also get an Error message saying 0x041D2C1C Configuration File CVC Validation Failure which for what I have read in the forum looks to me like it might be the certificates ?
I tried changing from DOCSIS 1 to 1.1 and also enabling and disabling the BPI and BPI+, but no success at all.. <<-- big surprise..
I downloaded a few tools from here like: FastCert v0.3, SNMPRape v1.1, even CertTxT v1.0; but which modem do I have to obtain the certificates the webstar or the SB5100 ? Also how can I know which range I have to scan ? cause scanning 16.7 million ip address will take ages lol 10.0.0.0 - 10.255.255.255 ...
When I scan with DHCP Force for some reason it doesn't get any MAC nor any info at all..
What do I need to make this work? Any tips or ideas will be greatly appreciated.!!! Thanks in advance